Enter/Exit Programming Mode Label ID
48
Cobalto™ CO5300 Scanner
Label ID
A Label ID is a customizable code of up to three ASCII characters (each can be one of hex 0x01-
0xFF), used to identify a bar code (symbology) type. It can be appended previous to or following
the transmitted bar code data depending upon how this option is enabled. This feature
provides options for configuring custom Label IDs as a pre-loaded set (see
"Label ID: Pre-
loaded Sets"
on page 48) or individually per symbology (see "Label ID: Set Individually Per
Symbology"
on page 49). If you wish to program the scanner to always include an industry
standard label identifier for ALL symbology types, see the previous feature
"Global AIM ID" on
page 47.
Label ID: Pre-loaded Sets
The scanner supports two pre-loaded sets of Label IDs. shows the USA set and the EU set.
See
"Label ID: Pre-loaded Sets" on page 232 for more information concerning the pre-loaded
sets that are provided.
CAUTION
DEFAULT
Label ID Pre-loaded Set = USA Set
Label ID Pre-loaded Set = EU Set
When changing from one Label ID set to another, all other scanner configura-
tion settings, including the host i
nterface type, will be erased and set to the
factory defaults. Any custom configuration or custom defaults will be lost.
$AE
$Ae
To Next Page
Loading...
Need help?
General
