Datalogic Cobalto C05300 - Standard 2 of 5 Check Character Transmission; Standard 2 of 5 Minimum Reads

Standard 2 of 5 Enter/Exit Programming Mode
Product Reference Guide 169
Standard 2 of 5 Check Character Transmission
This feature enables/disables transmission of an optional Standard 2 of 5 check character.
Standard 2 of 5 Check Charac
ter Transmission = Don’t
Send
Standard 2 of 5 Check Character Transmission
= Send
DEFAULT
Standard 2 of 5 Minimum Reads
This feature specifies the minimum number of consecutive times a Standard 2 of 5 label must
be decoded before it is accepted as good read.
Standard 2 of 5 Minimum Reads = 1
Standard 2 of 5 Minimum Reads = 2
DEFAULT
Standard 2 of 5 Minimum Reads = 3
Standard 2 of 5 Minimum Reads = 4
$CS2CT00

$CS2CT01
$CS2MR01
$CS2MR02
$CS2MR03
$CS2MR04