ELECTRICAL CONNECTIONS
92
MATRIX 220
ON-BOARD ETHERNET INTERFACE
The on-board Ethernet Interface can be used for TCP/IP communication with a remote
or local host computer by connecting the reader to either a LAN or directly to a host PC.
There is no need to use a crossover adapter since Matrix 220 incorporates an auto-cross
function.
A CAB-ETH-X-M0x
cable can be used to connect to a LAN.
On the Matrix 220 on-board Ethernet interface the following communication channels
are a
vailable:
• TCP Client
•TCP Server
• UDP Channel
•FTP Client
The following Fieldbus protocols are also available over the on-board Ethernet inter-
face:
• EtherNet/IP
•PROFINET IO
• Modbus TCP Client
For further details refer to the Help On Line page of the Reading Phase step (Channels)
and
(Fie
ldbuses) in DL.CODE.
The following IoT protocol is also available over the on-board Ethernet interface:
•OPC UA
For further details, refer to "
OPC UA protocol" on page 94.
To Next Page
Loading...
Need help?
General
