STEP 5 - INSTALLING DL.CODE CONFIGURATION PROGRAM
PRODUCT REFERENCE GUIDE
9
Device Discovery
The User Interface opens and displays a list of all the devices belonging to the Local Area
Network. DL.CODE has a discovery feature to accomplish this task.
Figure 10 - Device Discovery
The discovery feature will also show devices not belonging to the LAN and display them
in gray (see Figure 10).
3. First the device must be added to the LAN by aligning its IP Address to the net-
work. The network administrator should prov
ide valid LAN address(es).
4. Find your device in the list by matching its serial number (SN) then click on the
device wrench ic
on
to open the Device Environment Configuration window.
5. Change the Ethernet Settings (IP Address, Subnet Mask, Gateway Address etc.)
accor
ding to the network requirements.
To Next Page
Loading...
Need help?
General
