BACKUP AND RESTORE THROUGH DL.CODE
PRODUCT REFERENCE GUIDE
161
BACKUP AND RESTORE THROUGH DL.CODE
DL.CODE allows Backup and Restore to be performed to/from the configuration PC via
file or to an external storage device such as BM100.
It can be performed for Single Reader and Internal Network (Master/Slave) configura-
tions.
Backup and Restore functions allow performing Complete Configuration and Environ-
ment parameter storage for Single Reader and ID-NET (Master/Slave) network devices
as well as device firmw
are. Backup and Restore can be applied to any reader connected
through a device having external backup memory, regardless of the reader's network
configuration.
Backup to and Restore from external device is supported by DL.CODE for all reading
devices when conne
cted to:
•CBX + BM100
•QLM-Series Gateways
NOTE
Before executing a Backup to a BM100 backup module make sure the
Write Protection switch is set to Unlocked.
To Next Page
Loading...
Need help?
General
