STEP 6 - DEVICE CONFIGURATION
PRODUCT REFERENCE GUIDE
15
Your reader is now optimized for decoding. Continue with the Reading Phase configura-
tion described on page 22.
Advanced Setup
To begin configuration, the reader must be correctly mounted at the correct reading dis-
tance for your application so that its Field of View covers the application reading area.
1. From the Task Area select Open Device Configuration.
2. The Open Device Configuration window opens showing the list of currently saved
con
figurations (jobs) saved on the device. For new devices, the only saved job is
the Default configuration. Click OK. The device enters run mode and begins acquir-
ing images.
3. Click on the Advanced Setup button and press the Play icon.
To Next Page
Loading...
Need help?
General
