SOFTWARE CONFIGURATION
162
MATRIX 220
Backup
To perform a Backup:
1. From the DL.CODE Device menu, select either Single R
eader Backup (to file on
PC); or Backup to external storage device.
NOTE
You will be reminded that configuration in temporary memory will not be saved so you
should sa
ve the c
onfiguration to the reader before performing Backup.
If you are performing a backup to a file you will be asked whether to include the firm-
ware or not.
At the end of the backup, DL.CODE shows a message indicating successful completion.
For ID-NET network Backup, select the Backup current Internal Network
configurations selection.
To Next Page
Loading...
Need help?
General
