RESTORE DEFAULTS
PRODUCT REFERENCE GUIDE
165
Restore Default Environment
Restore Default Environment returns all Environment parameters to their factory
default settings. The default IP address will be restored as well as all the parameters
managed in the Device Environment Configuration window.
The Factory Default static IP
address for all Matrix N Family
readers is:
IP Address = 192.168.3.100
Any previously saved configurations on the device will remain in memory
, but the
Default configuration is set as the startup configuration.
Restore Factory Defaults
In order to return a device to its absolute Factory default parameters (for example
device replacement) it is necessary to use the Restore Factory Defaults command. You
will be prompted to confirm.
All Environment parameters will be restored to Factory default values and any e
xisting
configurations stored on the device will be erased. The device will be reset and there-
fore start in run mode with the factory default configuration.
To Next Page
Loading...
Need help?
General
