OPC UA PROTOCOL
PRODUCT REFERENCE GUIDE
95
OPC UA on DL.CODE
The OPC UA server is disabled on DL.CODE by default. To enable it, go to Device>Set-
tings>Settings>OPC-UA Settings.
Figure 72 - Enabling OPC UA Server on DL.CODE
The user can also set a username and a password to access the OPC UA device. To
enable protection, go to Device>Settings>Security Settings>OPC-UA Settings.
Figure 73 - OPC UA security settings
For more information on OPC UA, download the OPC UA Technical Note from Datalogic
website.
To Next Page
Loading...
Need help?
General
