Dell Precision 7875 Tower - Installing the External Solid-State Drive Cage

Figure 30. Removing the external solid-state drive cage
Steps
1. Using a screwdriver, push the release button on the upper external flex bay slot to release the SSD cage.
2. Pull the external SSD cage out of the upper external flex bay slot.
Installing the external solid-state drive cage
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following images indicate the location of the external solid-state drive cage and provide a visual representation of the
installation procedure.
56
Removing and installing Customer Replaceable Units (CRUs)