Dell Precision 7875 Tower - Pcie Holder; Removing the Pcie Holder

Figure 41. Installing the slim optical-drive
Steps
1. Insert the slim optical-drive into the slot in the flex bay and push the slim optical-drive until it snaps into place.
2. Push the slim optical-drive until it snaps into place.
Next steps
1. Install the side cover.
2. Follow the procedure in After working inside your computer.
PCIe holder
Removing the PCIe holder
Prerequisites
1. Follow the procedure in Before working inside your computer.
2. Remove the side cover.
3. Remove the air shroud.
About this task
The following images indicate the location of the PCIe holder and provide a visual representation of the removal procedure.
Removing and installing Customer Replaceable Units (CRUs)
67