Dell Precision 7875 Tower - Ultraspeed Quad

Figure 58. Removing the UltraSpeed Duo card
Steps
1. Push the PCIe latch to open the PCIe door.
2. Lift and remove the UltraSpeed Duo card away from the expansion-card slot.
3. Slide the PCIe filler door down.
4. Lift and push the PCIe latch to close the PCIe door.
UltraSpeed Quad
Installing the UltraSpeed Quad card
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
84
Removing and installing Customer Replaceable Units (CRUs)