D-10
4. Click on the output coil icon
or press function key F7. After the name of the input
device and the comment dialog box have appeared, the device name (such as "Y"),
device number (such as "0"), and input comments (such as "output coil") can be
selected; press the Confirm button when finished.
5. Click on application command icon
or press function key F6. Click on "All
application commands" in the function classification field, and click on the End command
in the application command pull-down menu, or use the keyboard to key in "End" in that
field, and press the confirm button.
To Next Page
Loading...
Need help?
General
