OPERATION
4 Issue 1January 2008 (135)
u is used for setting up a data transmission of variables from an external PC to
the printer.
oard will call up a
keyboard where the user simply keys in the desired name and finishes with “Ok”.
riables can have the same name. If the name of an already used variable is
iable is used must be manually updated.
(2) Updating
p in f
le is updated and the printing
will continue with this value until a new value is sent.
pacity
(No
Buffer):
4) First Time On ariable does not
5) Weight Input:
Choosing this setting shows the “Buffer size” input field where
you set the delay. For each print pulse the internal buffer
(FIFO) is updated. No prints are made until the internal buffer
is filled (because the product associated with the weight is not
yet under the printer).
Serial Variable
This men
1
2
3
4
(1) Name
The name of the variable is entered here. Pressing the keyb
Note: No two va
changed, the fields in which the var
Can be set u ive different ways:
1) On Request: When the value is sent the variab
2) Each Print: A new value has to be send for each print (buffer ca
1000 Values).
3) Each print A new value has to be sent for each print.
ly: One (and only one) variable is received. The v
change until the print job is loaded again.
Use this setting where the input is generated by a scale and the
input needs to be delayed a certain amount of prints.
2786
To Next Page
Loading...
Need help?
General
