INSTALLATION
MECHANICAL INSTALLATION
nals are available:
.
lt free contact which closes when
printing is required.
(4) Sufficient space for installation and operation.
(5) If using a V200 an encoder to monitor the substrate speed is required.
Installation Requirements
Ensure that the following services and control sig
(1) Power - 115/230 Vac (+10%, -15%) 50/60Hz
(2) Compressed Air - 6 Bar (max.), dry, uncontaminated.
(3) A print start signal - this has to be a vo
(
30) 27864 Issue 1 January 2008