APPENDIX B: EASYDESIGN MANUAL
View Only
not have privileges to modify the design. Please
see section concerning Users and Passwords.
n both an approved design and a design to
lace. When
ign before
prin
Note: In standard mode the approving functions are not used and the function is therefore not
relevant for some users.
The View Only option is set if you do
Show Approved
A design can (but is not required to) contai
be modified.
When editing the design, modification of the non approved design takes p
required to print the approved design is printed.
The "View Approved" function allows the inspection of the approved des
ting.
27833 Issue 1January 2007 (271)
To Next Page
Loading...
Need help?
General
