OPERATION
PRINTING
27864 Issue 1 January 2008
Pressing ”START PRINT” in the main menu will call up the following display:
Use the explorer functions to locate the design you wish to print.
n has been made.
has been selected, the "Ok” button can be used. If a
design has been chosen and the "Ok” button pressed, the design will be loaded into
The printer is now ready for printing.
(2) View
This button allows you to view the selected design, described in detail on page no. 85.
Locating the design
1
2
(1) Ok (Start Printing)
The "Ok” button on this display is not active until a selectio
Once either a directory or a file
RAM.
All variables will be initialised and any prompted variables prompted.
(
84)
To Next Page
Loading...