APPENDIX B: EASYDESIGN MANUAL
If the printer is attached using LAN, select the "socket" button, otherwise
port from the list.
select the
If the socket button is pressed, type in the IP address of the printer (alternatively you
ed to it).
EasyDesign will suggest a name for the queue.
Modify as required and complete with the "Done" button.
can use the Host name of the printer if one is assign
Setting up the Serial Ports
To make sure the serial port settings match the settings of the printer, you may need to
verify the settings in the "File - V200 setup" menu.
27833 Issue 1January 2007 (269)