OPERATION
4 Issue 1January 2008 (95)
sert a line in the design. The display below shows the user options
offered by this feature.
should be considered as a filled box. In the above example, the line will start
(1) X
es the x-position (across the print head) of the field.
tion (longitudinally with the print head) of the field.
oved in the writing direction. Numerical
icated.
red.
This allows the width of the line to be indicated.
Numerical values can be entered.
(5) Phantom
Allows the item to be hidden during printing, i.e. it will not be printed.
Line
Here the user can in
A line
from (0,0) and end at (10,1)
Defin
Numerical values can be entered.
(2) Y
Defines the y-posi
If this value is increased, the field will be m
values can be entered.
(3) Line Height
This allows the height of the line to be ind
Numerical values can be ente
(4) Line width
1
3
2
4
5
2786