INSTALLATION
36) 27864 Issue 1 January 2008
he use of a print counter. That means it can be used to print a
defined amount of prints.
ter
ob is
ting will continue until
manually ended (or the print is otherwise interrupted).
) Action when done
ads the print job when the last print is printed.
s the print job (a new number of desired prints must be
• b, when the last
(3) Protect print memory
If enabled, a print in the print memory cannot be overwritten by an
external source. To load another print job, the current job must be
(manually) unloaded first.
Print Counter
The system supports t
1
2
3
(1) Enable prompting of print coun
If this check box is selected, the system will prompt the operator (when a j
manually started) for the number of prints to do. The prin
Please note that this setting only applies to a print job started on the printer itself. If a
design is transferred, the sender determines the "number of prints”.
(2
Use this field to define what should happen when the required number of prints has
been printed.
The options are:
• Quit print: Unlo
• Restart print: Restart
selected)
Ask: The operator is asked whether to restart or unload the jo
print has been printed.
(
To Next Page
Loading...
Need help?
General
