INSTALLATION
Defines whether the system should report ready (or not ready) while the print head is
returning to its home position.
er Divide
ue pulses per mm. E.g.
t gives 48 pulses per mm.
(The value zero and one requires the same encoder).
(4) Encod
(V200 printers)
If set to zero, the encoder must give 12 pulses per mm.
If set to another value, the encoder must give 12 times that val
setting the value to 4 requires and encoder tha
(
52) 27864 Issue 1 January 2008
To Next Page
Loading...
Need help?
General
