INSTALLATION
(2) Current Name
Use this edit field to give the operation another name that better suits your needs.
60 and 62 for info on
(4) Use default name
Resets the current name of the operation to the default name.
ect to design approval.
llowing states:
gn)
e design, and it
can now be printed by the normal o
alled (T ped an b
Once the approved state is reached the design cannot go back to the earlier states.
(3) Enable use of this signature
Indicates whether a signature is required to perform this operation.
Only an authorised user can sign for the operation (see pages
how to authorise a user).
Examples on Signing Setup in resp
The process of design approval uses the fo
(1) Draft (the designer can modify the design).
(2) Locked (the designer has locked the design)
(3) Reviewed (a reviewer has roughly approved the desi
(4) Approved (the person responsible for the designs have approved th
perator).
d can no longer (5) Rec he design is scrap e used).
Signing
operation
States used States used
States used:
Draft, Reviewed Draft, Locked,
Draft & Approved
& Approved: Reviewed &
Approved
Lock Design for 9
Review
Review Desig 9 n
Lock and
Review
9
Approve Design 9 9
Lock, Review
and Approve
9
(
66) 27864 Issue 1 January 2008
To Next Page
Loading...
Need help?
General
