OPERATION
(6) Pause
Toggles the printer between pause and ready. For V400 Printers this corresponds to
Park position.
already stored on the system, create a new design
s modification of the run settings (like contrast) while the system is printing.
he design) has been
ssing the save button saves the design with
ed setting. (Only applicable on draft designs).
Warning
Edit
Allow the modification of a design
or modify the design currently printed.
Settings
Allow
Save
A save button is shown if a setting (that is set to be stored in t
modified (but not saved in the design). Pre
the updat
when system is running normally again.
This Symbol is shown when system is running abnormally. It is removed
Reload
The print is reloaded and any prompted variables are prompted again. Any
ble that is updated on job start is also recalculated.
bon tension
Time/Date varia
Rib
Tensions the ribbon.
Info
hows remaining ribbon (and gives an estimate for when you need to reload
ribbon). Also shows web speed for printer models with an enco
info screen will also display the print heads curren
S
der. The
t temperature (in Celsius).
Test print
Simulates reception of one start pulse and hence prints one label (used for
test)
27864 Issue 1January 2008 (87)
To Next Page
Loading...
Need help?
General
