User’s Manual
100
Other tabs (Property, Network, Video Setting, and System) allow users to edit
the
IP
ca
m
era’s
corresponding
setting
s.
Click
on
<Apply>
at
the
bottom
and
users can see effect of the new setting in the Live video. The change of
settings will be applied to the webpage of the IP Camera as well.
If users wish to connect to the IP camera’s webpage via a browser, click on
<Link to WebPage> at the bottom. When the setting is completed, click <OK>
at the bottom to exit the Configuration menu.
NOTE: Only A5s IP Cameras with software version “d20110323NS” or
later support the configuration function.
Configuration Menu of a DVR:
The following is the Configuration menu of a DVR. Some items are not
available in CMS setting condition. Please refer to User’s Manual and OSD
Setup Manual of the DVR for detailed instruction.
To Next Page
Loading...