User’s Manual
103
For networks with limited bandwidth, dual stream will be a better choice. It
enables coexistence of high quality stream at local DVR side and lower
quality stream but faster transmission for CMS side. To select dual stream,
click on the bandwidth button to switch to <Dual Stream>. Then users can
furthermore choose different bit rates to adjust for the best displaying quality.
The setting will be applied immediately, and is going to be saved for CMS
next startup.
Sound Notification Setting
When a channel is selected, <Sound Notification(On/Off)> will be available for
setting. Check the box to enable sound notification function for the selected
channel. Note a message window will arise if there is no sound file selected
yet. Refer to section Display for more details about selecting sound files.
NOTE: On the top-left of the grid will show [SN] to indicate sound
notification is switched on.
In addition, there are some quick hot keys for setting up sound notification
function directly at CMS main window. Refer to the following description.
1. Click a channel grid and press the following keys:
Ctrl + n: Sound Notification ON
Ctrl + f: Sound Notification OFF
2. Click a channel grid and press the following keys:
Ctrl + Alt + n: Sound Notification ON for all sites
Ctrl + Alt + f: Sound Notification OFF for all sites
3. Click a site in the Site Tree and press the following keys:
Ctrl + Alt + n: Sound Notification ON for the selected sites
Ctrl + Alt + f: Sound Notification OFF for the selected sites
Camera Covert
If a camera is set to covert at the DVR side, uncheck the box in front of
<Camera Covert> to un-covert at CMS side. Then video stream will come in,
and an icon “ ” will be shown at bottom-left of the grid. The icon represents
that the camera is covert at the DVR side.
This function is only available when CMS and DVR side are logged in using
accounts with administrator authority.
To Next Page
Loading...