Eaton Rapid Link 5 - Page 89

3 Installation
3.2 Instruction leaflets
Rapid Link 5 · RAMO5 · RASP5 05/20 MN034004EN www.eaton.com 85
Vertical arrangement
Vertical arrangement, center fixing
Figure 41: Fixing dimensions (center)
Two M6 screws, tightening torque 1.3 Nm.
Figure 40: Fixing dimensions (standard) and mounting
4 x drill holes with threads for M6 screws.
When using pre-assembled screws, there must be a clearance between the mounting surface and the washer
of about 12 mm.
Tighten the screws to a torque of 1.3 Nm.
173 mm (6.81")
245.0 mm (9.65")
3
2
1
1
2
3
110 mm (4.33”) 110 mm (4.33”)
245 mm (9.65")