Eaton Rapid Link 5 - Page 93

3 Installation
3.2 Instruction leaflets
Rapid Link 5 · RAMO5 · RASP5 05/20 MN034004EN www.eaton.com 89
Figure 46: Mounting the enclosure cover
Figure 47: Attaching the M32 screw-on cover
 Tighten the M32 screw-on cover using the required tool with a torque of
2Nm.
3 Nm
(26.55 lb-in)
TORX 30 IP
5
4
3 Nm
(26.55 lb-in)
TORX 30 IP
5
4