20140704#1.0 EBS Ink Jet Systeme
7
Dear Users of EBS Ink Jet Systeme equipment,
Please read this manual necessarily in order to get full information about the
operation of your device.
Disclaimer:
We shall bear no responsibility for damage to the device if it is operated
improperly, i.e., inconsistently with this manual.
The application and use of the products are beyond our control and
therefore fall exclusively into your scope of responsibility.
As we wish to keep pace with permanently progressing technological
development and individual requirements of our clients, we need to reserve
the right to change the form, make and technical solutions of our devices.
Therefore no data, illustrations or descriptions of this manual shall form any
grounds for claims.
We spare no effort to ensure that this manual is reliable, includes all
modifications and is free from errors. However, the drawing up and
publication process is complex and an error can occur in spite of our
endeavors and wishes. We shall bear no responsibility for the
consequences of editorial and printing errors in this manual.
If your device contains a particular piece of equipment or needs performing an
operation that have not been illustrated or described in this manual, or if you
have queries on reading this manual, please contact any representative of
EBS Ink Jet Systeme for additional information.
This manual applies to Offline EBS Web User Interface (Offline WUI) in version
1.4 and the EBS-260 printers equipped with the control system in version
1.02.08. In order to view the printer system version go to:
On the printer LCD: Tools – Service – Information – System version,
In EBS Web User Interface (WUI): Information – About the program –
System version.
Application
The HANDJET
®
EBS-260 printer is designed for marking, labeling, putting prints
and simple graphics wherever the use of a manual labeling device is required or
preferred.
Prints are put on articles with the application of the INK-JET method.
Operational Safety
Before you start your printer for the first time read the hints given below
and follow the underlying principles for your own and other persons’
safety.
General Safety Instructions
1. The printer must not be operated in rooms where explosion hazard exists.
To Next Page
Loading...
