20140704#1.0 EBS Ink Jet Systeme
55
Start mode – the parameter allows you to set the value from which
counting starts after printer operation has been resumed. Four options are
available:
Min,
Max,
Start value,
Last value.
Start value – the counter setting from which counting starts after operation
has been interrupted, e.g. when the batteries discharge. This is effective
when the Start mode parameter is set to Start value.
Last value – the last setting of a counter, which is saved after the printer
has been switched off in regular mode.
Step – a counter increment. When the setting is a positive number,
counting is incremental, and when it is a negative number, counting is
decremental.
The Length parameter is used to adjust the number of counter digit
positions to that required by the user.
The Fill in parameter is used to define a replacement for insignificant digits
of a counter: 0 or space.
Suffix – any character string to follow the counter printout, limited to 41
characters.
Touch the button in order to add the object to a project or the
button to abandon the addition. If no changes have been made, you can return
to the previous screen by touching the button.
Text Object – Communications port
The Communications port text object is used to print automatically the data
that is transferred from external devices (e.g. a computer, automatic scales, a
barcode reader) to the printer.
Touch the button and then the button in order to
add a new, Communications port-type text object to a project.
To Next Page
Loading...
