74
EBS Ink Jet Systeme 20140704#1.0
Operating the Printer via Mozilla Firefox Web Browser
The printer can be operated via a Web Browser in two ways:
by establishing connection with the printer via WIFI and running EBS Web
User Interface (WUI) – see Establishing Connection between Printer
and Computer (p. 74).
by using Offline EBS Web User Interface (Offline WUI) after it has been
installed on the computer in advance.
The Service (p. 113) and Printer Control (p. 115) menus are not available in
Offline WUI.
Establishing Connection between Printer and Computer
Follow the below given steps to connect the printer with a computer:
1. Configure a WiFi wireless network,
2. Set the WiFi network parameters on the printer – see Connecting the
Printer to a New Network via WiFi (p. 30).
3. Read the IP Address of the printer on the Wireless Network Status screen
– see WiFi Wireless Connection (p. 29), and type it in into the Web
Browser (Mozilla Firefox).
EBS Web User Interface (WUI) displays on the computer screen.
Installing Offline EBS Web User Interface
The Offline EBS Web User Interface installation file is available on the printer
web site at http://www.ebs-inkjet.pl/ebs260 in the Information Materials sheet
tab. Follow the installation manual attached to the installation file.
Logging In
You are logged in automatically as Administrator by default (default password:
1). You can disable automatic logging in or change the default account - see
Users Manager (p. 108).
When the automatic logging in is disabled and EBS Web User Interface (WUI)
starts running, A list of users is displayed on the startup screen. Point at the
name of a user with the cursor and type in the password in the text field. After
you have logged in, you will see that printer interface functions vary according
to the user group you are assigned to – see Users Manager (p. 108).
Work Screen of EBS Web User Interface
The work screen consists of the following:
WUI MENU (Projects (p. 75), Tools (p. 105), Settings (p. 112), Service
(p. 113), Printer Control (p. 115), Info (p. 116) and user status as well as
the OFF/restart/log out button),
WUI module (Create a New Project (p. 75), Open and Edit a Project, (p.
76) Change editor settings (p. 112)),
Printer control module (Open project for printing (p. 118), Printer
Control (p. 115)).
To Next Page
Loading...
