Ecolab Elados EMP II E60 - 10.3.15.1 Selecting; 10.3.15.2 Batch; Quantity

417101438_EMPII_E60.docx
- 116 -
Rev. 11-02.14
10.3.15.1 Selecting
Fig. 10.47 Configuration / Batch: Selecting
- Batch is inactive
(Default setting)
 Batch is active
If batch metering is active, the
following items appear in the
submenu:
Menu item see chapter
• Quantity 10.3.15.2
• Input
10.3.15.3
10.3.15.2 Batch / Quantity
“Quantity” is used to establish the desired metering quantity (in µl, ml, l or G) per batch
metering process. Setting range: 0 – 99999
Fig. 10.48 Configuration Batch / Quantity