Ecolab Elados EMP II E60 - Operating Data; Amount of Pulses; Selecting; Displaying; Deleting

417101438_EMPII_E60.docx
- 123 -
Rev. 11-02.14
10.5.4 Operating data / Amount of pulses
The number of pulses received via the pump’s pulse input (plus II pins 3+4, see chapter
7.2.3
“Plug II connection details”) since it was first commissioned or last reset is displayed.
10.5.4.1 Selecting / Displaying / Deleting
Fig. 10.65 Operating data / Amount of pulses: Selecting / Displaying / Deleting