Ecolab Elados EMP II E60 - Wearing Part Set Types V3014, V3025, 00043, 00048, 00072 and Type 00112; Pump Head - Service Set Higher Pressure (1.6 Mpa; 16 Bar)

417101438_EMPII_E60.docx
- 130 -
Rev. 11-02.14
13.2 Wearing part set types V3014, V3025, 00043, 00048, 00072 and type 00112
consisting of (each 1 x):
• Suction valve (pos. 1)
• Pressure valve (pos. 1)
• Connection set for hose 4/6, 6/8, 6/12 mm (pos. 2)
• Vent screw (pos. 7)
• Diaphragm (pos. 14)
• Support disk (excl. type V3025), (pos. 15)
• Bellow (pos. 8)
Description - Wearing Part Set EMP II
Article no.
EBS No.
V3014 PVFPKE
248452
(on request)
V3025 PVFPKE
248453
(on request)
00043/00048 PVFPKE
248478
10109191
00072 PVFPKE
248479
10019515
00112 PVFPKE
248480
10002548
V3014 PVEPKE
248458
(on request)
V3025 PVEPKE
248459
10004488
00043/00048 PVEPKE
248488
(on request)
00072 PVEPKE
248489
(on request)
00112 PVEPKE
248490
(on request)
1. Pump type (pump capacity)
V3014 = 1,4 l/h
V3025 = 2,5 l/h
00043/00048 = 4,3 / 4,8 l/h
00072 = 7,2 l/h
00112 = 11,2 l/h
2. Valve material
PV = PVDF
3. Sealing material
FP = Viton B
EP = EPDM
4. Valve ball material
KE = ceramics
13.3 Pump head – Service set “Higher pressure” (1.6 MPa / 16 bar)
consisting of:
Pos.
Description
1
Suction/pressure valve SDV PVFPKE000 G3/8-G3/8-99
2
Connection set 3/8“ PVDF für Schlauch 4/6, 6/8, 6/12 mm (nur für Saugseite)
7
Vent screw, PVDF/VITON B
8
Bellow
14
Diaphragm
Description (Service-set EMP II E60)
Article No.
EBS No.
00014 PVFPKE
(on request)
(on request)
00025 PVFPKE
(on request)
(on request)
00043 PVFPKE
(on request)
(on request)
Wearing Part Set EMP II
V3014
PV
FP
KE