Ecolab Elados EMP II E60 - Pump Key Definitions

417101438_EMPII_E60.docx
- 132 -
Rev. 11-02.14
14 Technical Specifications
14.1 Pump keys
14.1.1 Pump key 1
Other specifications provided on request!
1. Electrical version
E 60 = (explanation, see chapter 14.1.3)
2. Pump output 50 Hz (60 Hz)
V3014 = 1.4 l/h (1.7 l/h)
V3025 = 2.5 l/h (3.0 l/h)
00048 = 4.8 l/h (5.7 l/h)
00043 = 4.3 l/h (5.1 l/h)
00072 = 7.2 l/h (8.6 l/h)
00112 = 11.2 l/h (13 l/h)
00240 = 24 l/h (29 l/h)
spezial version: high pressure:
V3014 = 1.6 MPa (16 bars) = 1,2 l/h (1,4 l/h)
V3025 = 1.6 MPa (16 bars) = 2,1 l/h (2,5 l/h)
00043 = 1.6 MPa (16 bars) = 3,7 l/h (4,4 l/h)
3. Pump head material
PV = PVDF (Standard)
PP = PP
VA = V4A
4. Metering backpressure (not freely selectable)
02 = 0.2 MPa (2 bars) (for 24 l/h) (1.6 bar)
04 = 0.4 MPa (4 bars) (for 4.8 l/h) (3.2 bar)
05 = 0.5 MPa (5 bars) (for 11.2 l/h) (4 bar)
06 = 0.6 MPa (6 bars) (for 7.2 l/h) (4,8 bar)]
10 = 1 MPa (10 bars) (for 1.4 / 2.5 / 4.3 / 7.2 l/h) (8 bar)
special version: high pressure:
16 = 16 bar (12,8 bar)
5. Gasket material
FP = Viton B (Standard)
EP = EPDM
KA = Kalrez
6. Ball material
KE = Ceramic (Standard)
VA = V4A (stainless steel)
PT = Teflon
7. Valve material
PV = PVDF (Standard)
PP = PP
VA = V4A (stainless steel)
8. Valve spring
99 = without spring (Standard)
02 = SAV without spring; DRV simply
spring-loaded (0.3 bars)
9. Mains power supply
17 = Mains power cable 2 m
appliance and grounding type
plug (E60, 230 V) (standard)
21 = Mains power cable 3 m
appliance plug and cable end sleeves
(E60, 115 V)
10. Voltage/frequency
01 = 115V / 50 Hz
02 = 115V / 60 Hz
03 = 230V / 50 Hz (Standard)
04 = 230V / 60 Hz
07 = 24 V / 50 Hz
E60
V3025
PV
10
FP
KE
PV
99
17
03