Patient Monitor User Manual Monitoring TEMP
- 126 -
13.3 Switching T1/T2 On/Off
In Menu > System Setup > Module Switch or select shortcut key ModuleSet > Module Switch,
T1 or T2 can be switched on/off separately and won’t be affected by each other.
13.4 TEMP Monitoring Setup
With a reusable TEMP probe you can plug the probe directly into the TEMP connector on
XM module.
Apply the TEMP probes securely to the patient.
Switch on the monitor
It takes 5 minutes for the temperature measurement to stabilize.
13.5 Calculating Temp Difference
The monitor can calculate and display the difference between two temperature values by
subtracting the second value from the first. The difference is labeled TD.