Patient Monitor User Manual EMC Information
- 283 -
B.3 Electromagnetic Immunity
Guidance and manufacture’s declaration – electromagnetic immunity
elite V5 V6 V8 is intended for use in the electromagnetic environment specified below. The
customer or the user of elite V5 V6 V8 should assure that it is used in such an environment.
Immunity
test
IEC/EN 60601 test
level
Compliance
level
Electromagnetic environment -
guidance
Conducted RF
IEC/EN
61000-4-6
Radiated RF
IEC/EN
61000-4-3
3 V
rms
150 kHz to 80 MHz
6Vrms
c
in ISM
bands between
0.15 MHz and 80
MHz
3 V/m
80 MHz to 2.7GHz
See Table 1
3 V
rms
150 kHz to
80 MHz
6Vrms
c
in
ISM bands
between
0.15 MHz
and 80 MHz
3 V/m
80 MHz to
2.7 GHz
Comply with
Table 1
Portable and mobile RF
communications equipment should be
used no closer to any part of elite V5
V6 V8, including cables, than the
recommended separation distance
calculated from the equation
applicable to the frequency of the
transmitter.
Recommended separation distance
Pd 2.1= 150 KHz to 80 MHz
Pd 2.1= 80 MHz to 800 MHz
Pd 3.2= 800 MHz to 2.7 GHz
E/6 Pd =
at RF wireless
communications equipment bands
(Portable RF communications
equipment (including peripherals
such as antenna cables and external
antennas) should be used no closer
To Next Page
Loading...
Need help?
General
