Patient Monitor User Manual Monitoring RM
- 179 -
19.8.1 Viewing Loops
To view the respiratory loops, select Respiratory Loop on the RM Setup menu, and the
respiratory loop window will be displayed on the screen. Both graphic representation of the
respiratory loop and the associated keys are available in this window.
19.8.2 Storing and Reviewing Loops
Select the key Save to store the respiratory loops in the current respiratory cycle for reference. Up
to four loops can be stored, and the storing time for the latest four reference loops is displayed
above the loops. The latest stored loops will replace the previously stored loops when the number
of stored loops is over four.
Also, users can review the stored loops by selecting the time tags in the window for displaying
the corresponding stored loops.
19.8.3 Changing Loop Type
To change the loop type, select Respiratory Loop > Setup > Display Loop and choose a loop
type from the drop-down list.
19.8.4 Showing/Hiding the Reference Loop
To show/hide the reference loop, select Respiratory Loop > Setup > Reference Loop and
choose
On/Off from the drop-down list.
19.8.5 Resizing the Loops
To resize the loop, select Respiratory Loop > Setup to open the F-V Loop Setup or P-V Loop
Setup window in which you can set up the top ruler and bottom ruler for Paw, Vol and Flow.
To Next Page
Loading...
Need help?
General
