Patient Monitor User Manual Basic Operation
- 17 -
3 Technical alarm
indicator
When a technical alarm occurs, the indicator
lights on or flashes with different frequencies and
colors reflecting the alarm level.
4 Display
17 inch color screen. Resolution: 1280×1024.
5 Power supply switch Press it to turn the monitor on when the monitor
is connected to the AC power supply, or press the
key to turn the monitor off when the monitor is
on.
6 Battery indicator Refer to the section Battery Power Indicator for
details.
7 AC power indicator When the monitor is connected to AC power, the
indicator is in green.
8 Mute Press it to suspend the output of all audible alarm
signals. Upon the configuration, pressing this
button to pause or turn off the audio alarm.
Further information can be found in the section
Audio Alarm Paused and section Audio Alarm
Off.
9 Start/stop NIBP
measurement
Press it to start or stop blood pressure
measurement.
10 Trend Press it to review the trend table.
11 Freeze/unfreeze Press it to freeze or unfreeze waveforms.
12 Start/stop recording Press it to start or stop recording.
13 Menu If no menu is displayed on the screen, pressing it
will enter the main menu. If there is a menu
displayed on the screen, pressing it will close that
menu.
14 Rotary knob Users can rotate the rotary knob clockwise or
counter-clockwise to highlight the desired item,
and press it to select the item.
To Next Page
Loading...
Need help?
General
