C
HAPTER
19
| RADIUS Client Commands
– 166 –
This setting has not been effective !
If want to take effect, please execute make-radius-effective command !
AP(config)#
radius-server
accounting port
This command sets the RADIUS Accounting port.
SYNTAX
radius-server accounting port <port>
port - The port used by the RADIUS Accounting server.
(Range: 1024~65535)
DEFAULT SETTING
1813
COMMAND MODE
Global Configuration
COMMAND USAGE
When the RADIUS Accounting server UDP port is specified, a RADIUS
accounting session is automatically started for each user that is
successfully authenticated to the access point.
EXAMPLE
AP(config)# radius-server accounting port 1882
This setting has not been effective !
If want to take effect, please execute make-radius-effective command !
AP(config)#
radius-server
accounting key
This command sets the RADIUS Accounting key.
SYNTAX
radius-server accounting key <key>
key - The RADIUS Accounting server keyphrase.
DEFAULT SETTING
DEFAULT
COMMAND MODE
Global Configuration
To Next Page
Loading...
Need help?
General
