C
HAPTER
21
| MAC Address Authentication Commands
– 173 –
DEFAULT
None
COMMAND MODE
Global Configuration
EXAMPLE
AP(config)#address filter delete allowed 00-70-50-cc-99-1b
AP(config)#
mac-authentication
server
This command sets address filtering to be performed with local or remote
options. Use the no form to disable MAC address authentication.
SYNTAX
mac-authentication server [local | remote]
no mac-authentication server
local - Authenticate the MAC address of wireless clients with the
local authentication database during 802.11 association.
remote - Authenticate the MAC address of wireless clients with the
RADIUS server during 802.1X authentication.
DEFAULT
Disabled
COMMAND MODE
Global Configuration
EXAMPLE
AP(config)#mac-authentication server remote
AP(config)#
RELATED COMMANDS
address filter entry
radius-server address
mac-authentication
session-timeout
This command sets the interval at which associated clients will be re-
authenticated with the RADIUS server authentication database. Use the no
form to disable reauthentication.
SYNTAX
mac-authentication session-timeout <seconds>
no mac-authentication session-timeout
seconds - Re-authentication interval. (Range: 30-65555)
To Next Page
Loading...
Need help?
General
