Edge-Core EAP8518 User Manual

A PPENDIX B | WDS Setup Examples
WDS Links Between Three or More APs
– 245 –
ACCESS POINT A CONFIGURATION
1. Configure VAP 0 settings:
a. Set VAP 0 to WDS-AP mode.
b. Set security to WPA-PSK or WPA2-PSK and configure a key.
c. Set the SSID and enable the VAP.
2. Configure VAP 1 settings:
a. Set VAP 1 to WDS-AP Mode.
b. Set security to WPA-PSK or WPA2-PSK and configure a key.
c. Set the SSID and enable the VAP.
ACCESS POINT B CONFIGURATION
1. Configure VAP 0 settings:
a. Set VAP 0 to WDS-STA mode.
b. Configure the WDS Parent SSID and Parent MAC address of VAP 0
on Access point A.
c. Set the same security and encyption key as VAP 0 on Access
Point A.
d. Enable the VAP.
2. Configure VAP 1 settings:
a. Set VAP 1 to WDS-AP Mode.
b. Set security to WPA-PSK or WPA2-PSK and configure a key.
c. Set the SSID and enable the VAP.
ACCESS POINT C CONFIGURATION
1. Configure VAP 0 settings:
a. Set VAP 0 to WDS-STA mode.
b. Configure the WDS Parent SSID and Parent MAC address of VAP 1
on Access point B.
c. Set the same security and encyption key as VAP 1 on Access
Point B.
d. Enable the VAP.

Edge-Core EAP8518 Specifications

General

Brand	Edge-Core
Model	EAP8518
Category	Wireless Access Point
Language	English