Edge-Core EAP8518 - Page 246

A PPENDIX B | WDS Setup Examples
WDS Links Between Three or More APs
– 246 –
2. Configure VAP 1 settings:
a. Set VAP 1 to AP Mode.
b. Set the required security for wireless clients.
c. Set the SSID and enable the VAP.
ACCESS POINT D CONFIGURATION
1. Configure VAP 0 settings:
a. Set VAP 0 to WDS-STA mode.
b. Configure the WDS Parent SSID and Parent MAC address of VAP 1
on Access point A.
c. Set the same security and encyption key as VAP 1 on Access
Point A.
d. Enable the VAP.
2. Configure VAP 1 settings:
a. Set VAP 1 to AP Mode.
b. Set the required security for wireless clients.
c. Set the SSID and enable the VAP.