ELTEX ESR-3100 User Manual

ESR series service routers.ESR-Series. User manual
252
•
•
Step Description Command Keys
8 Define OSFP process routes
precedence.
esr(config-ospf)# preference
<VALUE>
<VALUE> – OSFP process
routes precedence, takes
values in the range of [1..255].
esr(config-ipv6-ospf)# preference
<VALUE>
9 Define maximum number of equivalent
routes (optional).
esr(config-ospf)# maximum-path
<PATHS>
<PATHS> – number of
equivalent routes to the target,
takes values of [1..32].
Default value: 16.
esr(config-ipv6-ospf)# maximum-
path <PATHS>
10 Enable compatibility with RFC 1583
(optional).
esr(config-ospf)# compatible
rfc1583
esr(config-ipv6-ospf)# compatible
rfc1583
11 Add subnets filtration in incoming or
outgoing updates (optional).
esr(config-ospf)# prefix-list
<PREFIX-LIST-NAME> { in | out }
<PREFIX-LIST-NAME> – name
of a subnet list being
configured, set by the string of
up to 31 characters.
in – incoming routes
filtration;
out – advertised routes
filtration.
esr(config-ipv6-ospf)# prefix-list
<PREFIX-LIST-NAME> { in | out }
12 Enable advertising of routes received in
an alternative way (optional).
esr(config-ospf)# redistribute
static [ route-map <NAME> ]
<NAME> – name of the route
map that will be used for
advertised static routes
filtration and modification, set
by the string of up to 31
characters.
esr(config-ipv6-ospf)# redistribute
static [ route-map <NAME> ]
esr(config-ospf)# redistribute
connected [ route-map <NAME> ]
<NAME> – name of the route
map that will be used for
filtration and modification of
advertised directly connected
subnets, set by the string of up
to 31 characters.
esr(config-ipv6-ospf)# redistribute
connected [ route-map <NAME> ]
esr(config-ospf)# redistribute rip
[ route-map <NAME> ]
<NAME> – name of the route
map that will be used for
advertised RIP routes filtration
and modification, set by the
string of up to 31 characters.

ELTEX ESR-3100 Specifications

General

Brand	ELTEX
Model	ESR-3100
Category	Network Router
Language	English