Extreme Networks ExtremeSwitching X435 Series User Manual

Figure 315: Removing a Front-Mounted Switch from a Two-Post Rack
Figure 316: Removing the Switch from a Four-Post Rack
3. Place the switch on a secure, flat surface.
4. Using a #2 Phillips screwdriver, remove the front mounting brackets from the sides of the switch.
5. For four-post installations, remove the rear mounting brackets from the rear rack posts.
Removing Switches from Service
Removing a Switch from a Rack
ExtremeSwitching Hardware Installation Guide 377

Extreme Networks ExtremeSwitching X435 Series Specifications

General

Brand	Extreme Networks
Model	ExtremeSwitching X435 Series
Category	Switch
Language	English