Extreme Networks ExtremeWare XOS Guide - Page 286

Routing Policies
ExtremeWare XOS 11.3 Concepts Guide
286
then {
permit;
}
}
entry deny_entry {
if match any {
nlri any/8;
nlri 22.44.66.0/23 exact;
}
then {
deny;
}
}
Translating a route map to a policy
You may be more familiar with using route maps on other Extreme Networks switches. This example
shows the policy equivalent to an ExtremeWare route map.
ExtremeWare route map:
Route Map : rt
Entry : 10 Action : permit
match origin incomplete
Entry : 20 Action : deny
match community 6553800
Entry : 30 Action : permit
match med 30
set next-hop 10.201.23.10
set as-path 20
set as-path 30
set as-path 40
set as-path 40
Entry : 40 Action : permit
set local-preference 120
set weight 2
Entry : 50 Action : permit
match origin incomplete
match community 19661200
set dampening half-life 20 reuse-limit 1000 suppress-limit 3000 max-suppress
40
Entry : 60 Action : permit
match next-hop 192.168.1.5
set community add 949616660
Here is the equivalent policy:
entry entry-10 {
If {
origin incomplete;
}
then {
permit;
}