Access to Both MSM Console Ports—Modular Switches Only
ExtremeWare XOS 11.3 Concepts Guide
53
User Name Password Password Password Password Flags
Expiry Max. age Min. len History
Date Limit
---------------------------------------------------------------------------
admin None None None ---
user None None None ---
test Apr-17-2005 12 32 9 C--
---------------------------------------------------------------------------
Flags: (C) Password character validation enabled, (L) Account locked out
(l) Account lockout on login failures enabled
You can also display which accounts may be locked out by issuing the following command:
show accounts
The following shows a sample display from the show accounts command:
User Name Access LoginOK Failed
---------------- ------ ------- ------
admin R/W 3 1
user RO 0 0
dbackman R/W 0 0
ron* RO 0 0
nocteam RO 0 0
----------------------------------------
(*) - Account locked
Access to Both MSM Console Ports—Modular Switches
Only
With ExtremeWare XOS version 11.2, you can access either the primary or the backup MSM regardless
of which console port you are connected to.
Use the following command:
telnet msm [a | b]
Domain Name Service Client Services
The Domain Name Service (DNS) client in ExtremeWare XOS augments the following commands to
allow them to accept either IP addresses or host names:
â—Ź telnet
â—Ź download bootrom
â—Ź download image
â—Ź ping
â—Ź traceroute
â—Ź configure radius server
â—Ź configure tacacs server