Extreme Networks ExtremeWare XOS Guide User Manual

Quality of Service
ExtremeWare XOS 11.3 Concepts Guide
306
Following is sample output of this command for a BlackDiamond 10K switch 10 Gbps port:
Port: 8:1
Virtual-router: VR-Default
Type: XENPAK
Random Early drop: Disabled
Admin state: Enabled with 10G full-duplex
Link State: Ready
Link Counter: Up 0 time(s)
VLAN cfg:
STP cfg:
Protocol:
Trunking: Load sharing is not enabled.
EDP: Enabled
DLCS: Unsupported
lbDetect: Unsupported
Learning: Enabled
Flooding: Enabled
Jumbo: Disabled
BG QoS monitor: Unsupported
QoS Profile: None configured
Queue: Qp1 MinBw=0% MaxBw=100% Pri=1
Qp2 MinBw=0% MaxBw=100% Pri=2
Qp3 MinBw=0% MaxBw=100% Pri=3
Qp4 MinBw=0% MaxBw=100% Pri=4
Qp5 MinBw=0% MaxBw=100% Pri=5
Qp6 MinBw=0% MaxBw=100% Pri=6
Qp7 MinBw=0% MaxBw=100% Pri=7
Qp8 MinBw=0% MaxBw=100% Pri=8
Ingress Rate Shaping : support IQP1-8
IQP1 MinBw= 0% MaxBw=100% Pri=1
IQP2 MinBw= 0% MaxBw=100% Pri=2
IQP3 MinBw= 0% MaxBw=100% Pri=3
IQP4 MinBw= 0% MaxBw=100% Pri=4
IQP5 MinBw= 0% MaxBw=100% Pri=5
IQP6 MinBw= 0% MaxBw=100% Pri=6
IQP7 MinBw= 0% MaxBw=100% Pri=7
IQP8 MinBw= 0% MaxBw=100% Pri=8
Ingress IPTOS: Disabled
Egress IPTOS: Replacement disabled
Egress 802.1p: Replacement disabled
Smart Redundancy: Unsupported
VLANs monitored for stats: Unsupported Unsupported
Software redundant port: Unsupported
jitter-tolerance: Unsupported
Following is sample output of this command for a BlackDiamond 10K switch 1 Gbps port:
Port: 2:1
Virtual-router: VR-Default
Type: SX
Random Early drop: Disabled
Admin state: Enabled with auto-speed sensing auto-duplex
Link State: Ready

Extreme Networks ExtremeWare XOS Guide Specifications

General

Brand	Extreme Networks
Model	ExtremeWare XOS Guide
Category	Software
Language	English