RIP
ExtremeWare XOS 11.3 Concepts Guide
536
Figure 67: RIP configuration example
The stations connected to the system generate a combination of IP traffic and NetBIOS traffic. The IP
traffic is filtered by the protocol-sensitive VLANs. All other traffic is directed to the VLAN MyCompany.
In this configuration, all IP traffic from stations connected to slots 1 and 3 have access to the router by
way of the VLAN Finance. Ports on slots 2 and 4 reach the router by way of the VLAN Personnel. All
other traffic (NetBIOS) is part of the VLAN MyCompany.
More commonly, NetBIOS traffic would be allowed on the Finance and Personnel VLANs, but this
example shows how to exclude that traffic. To allow the NetBIOS traffic (or other type of traffic) along
with the IP traffic, remove the
configure finance protocol ip and configure Personnel
protocol ip
commands from the example.
The example in Figure 67 is configured as follows:
create vlan Finance
create vlan Personnel
create vlan MyCompany
configure Finance protocol ip
configure Personnel protocol ip
configure Finance add port 1:*,3:*
configure Personnel add port 2:*,4:*
configure MyCompany add port all
configure Finance ipaddress 192.207.35.1
configure Personnel ipaddress 192.207.36.1
1234AB5678
EX_047
1
Finance Personnel
MyCompany
IP
NetBIOS
IP
NetBIOS
2
IP
NetBIOS
IP
NetBIOS
3 4
= IP traffic
= NetBIOS traffic
192.207.36.0192.207.35.0
192.207.36.1192.207.35.1
To Next Page
Loading...