RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400e Card Printer User Guide (L001172 Rev. 1.1)
5-13
Accessing the Home page
Step Procedure
1
Open a window for your network browser application on your local PC.
2
Find the IP address of the Printer. (Note: See Accessing the DTC400e IP
Address as needed to get this from the LCD of the Printer.)
3
Enter the IP address of the Printer you want to access into the address bar of
the browser. (Note: The IP address will change for your printer installation.)
4
Press Enter or click on GO.
5
View the Home page. The Home Page displays general information about
the Printer. See the next page.
Display – See Procedural Steps 2 and 3 (above)
To Next Page
Loading...
