RESTRICTED USE ONLY Fargo Electronics, Inc.
DTC400e Card Printer User Guide (L001172 Rev. 1.1)
5-21
Entering the TCP Window Size
Step Procedure
1 Select the Network link from any web page of the Printer.
2 Select the TCP window size from the drop-down menu, as shown below.
• This entry provides for entry of the TCP Window Size. It adjusts how
much data can be sent to the Printer at any one time.
• It is recommended that the default value of 2 MSS Packets be used to
ensure good compatibility with all client applications.
3 Click on the Submit button to save this setting.
4 Login as a root User if you are so prompted. (Note: Any change of setting
will only be accepted after you have successfully logged in.)
5 Reboot the Printer to effect this change.
See the Reviewing Web page security
procedure.
To Next Page
Loading...
